Manly Manufacturing

What they offer

Gunsmith

Work

Firearm appraisal, Cerakote, cleaning, machining, optics mounting, repair, sight installation and trigger work

Gun shop

Transfers

FFL transfers

Prices

As published by the business.

• Bore sight $20 per firearm
• Drill & tap barrel or receiver (per hole) $30
• Function test fire only $30 per firearm
• Check firing pin protrusion $35 per firearm
• Check head space $35 per firearm
• Install receiver sights (gun drilled & tapped) $35 per firearm
• Minimum charge per gun $35
• Hourly rate $65 per hour
• Install barrel band $65 hourly · Billed at the hourly rate.
• Install or adjust trigger (Shilen, Timney, Dayton-Traister, Moyer) $65 per trigger
• Remove fired case from chamber $65 hourly · Billed at the hourly rate.
• Remove obstruction from bore $65 hourly · Billed at the hourly rate.
• Tactical bolt knob installation (Remington, Winchester, Savage, Weatherby, Howa). Stainless bolts $75. $70 per installation · Stainless bolts $75.
• Detailed clean, oil, check, make suggestions $75 per firearm
• Scope mounting & truing (gun drilled & tapped) $75 per firearm
• Uncertified written appraisals, cost estimates $75 per appraisal
• Make chamber cast $85 per chamber
• Cut & crown barrel $95 per barrel
• Install recoil pad $115 per firearm · Materials extra.
• Bolt Stop Button $125 per installation
• Install or adjust trigger (single set) $125 per trigger
• Install safety $125 per firearm
• Pillar bed (in addition to glass) $125 per rifle · In addition to glass bedding.
• Install Sako/M16-style extractor $130 per firearm
• Install muzzle brake $145 per firearm
• Install adjustable comb hardware $165 per firearm
• Install muzzle brake (with receiver removal) $165 per firearm
• Fit, bed and finish fiberglass stock $200 per stock
• Glass bedding barrel and action, hunting rifle $200 per rifle
• Inlet and finish semi-finished stock (no checkering or attachments) $350 per stock · No checkering or attachments.
• Assemble & reassemble firearm (complex firearms extra) $65 hourly · Complex firearms extra; billed at the hourly rate.
• Install sling swivels – qty. 2 (materials extra) $65 per pair · Materials extra.
• Make & install spring (materials extra) $65 hourly · Materials extra; billed at the hourly rate.
• Remove fouling (materials extra) $65 hourly · Materials extra; billed at the hourly rate.
• Install recoil pad (materials extra) $115 per firearm · Materials extra.
• Install liner in barrel (liner, bluing extra. .22 RF only) $125 per barrel · Liner and bluing extra; .22 RF only.
• Install adjustable butt plate (materials extra) $135 per firearm · Materials extra.
• Install pre-threaded & chambered barrel (polishing, bluing extra) $165 per firearm · Polishing, bluing extra.
• “High 5” Accurizing: Recrowning, free float barrel, pillar / glass bedding, adjust or replace trigger (trigger cost extra), remounting of scope with lapping of rings. $375 per gun · Trigger cost extra.

Near Yreka

The nearest gunsmiths USA Arms lists, by distance.

• Dangerous Dave and SonsYreka, CA · under a mile

All gunsmiths in California · Everything in California

Sources and corrections